01
Adjustable Angle Wall Mount Aluminum Flagpole Bracket
Aluminum Flag Pole Bracket Mount
Our stand mounts are made of aluminum and come in a white, black, or black finish. They are designed to fit flagpoles with a 1" diameter, but can also fit flagpoles as small as 0.85" in diameter.
3x5 Aluminum Flagpole Stand Mount By default, the mount comes with 4 screws and plastic wall plugs. This helps make mounting easier in different locations. These plugs allow you to mount the mount on nearly any surface, but wood is best.
When purchasing a custom 3×5 flag, you have the option of adding a wall mount and flagpole. The flagpole kit needs to be assembled separately and then placed inside the wall mount. The white screws help secure the flagpole to the stand. Be careful not to overtighten the white screws.
Installation is simple but requires the right tools. We recommend using a drill to speed up the process. Using a screwdriver can be difficult and hammering won't work.
Step 1:
Make sure you have the following: Stand Pole Mount, 4 screws (these instructions are for a wood surface so we won't be using plastic wall plugs). Drill holes using the appropriate size drill bit. Mark the screw locations with a pen or marker. Before assembly, always assemble the pole and double check that it will fit the mount.
Step 2:
Choose the position you want to use. You can hold the mount and pole against the wall before installation to see what position you like best.
Step 3:
Place the bracket against the wall you want to mount it on. Use a marker or pen to mark the holes where the screws will go. We recommend drawing an outline of the circle where the screws will go.
Step 4:
Using a drill and one of the screws, drill a very small hole in the center of the circle. Only the tip of the screw should go into the wall. Do this for all of the marked circles.
Step 5:
Take the drill, bracket, and screw. Place the bracket over the mark on the wall and drill the screw into the corresponding hole. Only drill halfway. Step back and make sure it looks straight and doesn't need to be adjusted. If it's aligned correctly, drill the screw into the wall.
Step 6:
Place the flag on the pole and slide the pole into the bracket.
Step 7:
Step back and take a look at the new decoration in your home!